Differences

This shows you the differences between two versions of the page.

Link to this comparison view

manual_poses_interactive [2013/03/24 00:08]
elan created - initial version
manual_poses_interactive [2014/04/22 02:01] (current)
fe80:1208:7262:b30c:d0e6:b99d:3923:e47d
Line 30: Line 30:
    
 - The //cooldown// loop (blue), default: time line 3  - The //cooldown// loop (blue), default: time line 3 
 +
 +//Orgasm// loop replaces the //animation// (but not penetration) loop once a model orgasms. An //orgasm// loop can play multiple times (multiple orgasms, duh). If done, the //cooldown// loop is played - always once. Then the pose returns to the //animation// loop.
 +
 +Two things:
 +
 +First, your animation can live without orgasm and cool down loop. Personally, I consider poses without it as incomplete.
 +
 +Second, the default time lines set can be changed. Heck, you can even overlap loops. You could, for example, use time line 1,2 and half of 3 for your animation loop, the second half of 3 for orgasm, the first half of 4 for cool down and the rest for your penetration loop. Or, you can use time line 1 for animation, time line 2 for orgasm AND cool down (both start at the beginning of time line 2 and both end at the end of time line 2) and use time line 3 and 4 for your penetration loop.
 +
 +That said, let's do a pose already. 
 +
 +===== Pose On =====
 +I select my default pose editing models: Carl, average male, Dee Dee, slightly modified Dee average female, and Jill-Jill, slightly modified Jill average female. Keep in mind that you can change outfits in pose editor. For this illustrated walk-through, we'll stick to a simple pose. Carl will just fuck Dee Dee's cunt on a table. Simple enough. Let's go.
 +
 +Image 1: {{http://www.imagebam.com/image/bdd9ff245088419}} 
 +
 +==== The starting pose ====
 +Before everything else, we need to create the initial pose. This is the most important task, and one that will take a lot of time. The starting pose will later be copied to start and end of all other loops; a lot of effort should go here. Things like face (emotion!) sliders, hand sliders and Eye Lookat tend to be ignored by a lot of poses. Don't. Details add up, pay attention to details and your pose will look great. When PE has loaded, I select "new pose" - "double" as this will be a dual pose. Go to the table location. I loaded up the Bedroom and will use the desk for my pose.
 +
 +Image 2: {{http://www.imagebam.com/image/44e352245089968}} 
 +
 +Both models are in base pose at the same spot, so let's move the male one out of the way. Click on the male's portrait to select, right-click "Hip" "Translation" and select "Set Manipulator".
 +Shift-click on of the cones and drag the model away from the table, where it won't disturb you. Shift-clicking the hip will move all other body parts without losing relative positioning. Try dragging the model without shift, see what happens, hit undo (CTRL-Z or leftmost button in the tool bar).
 +
 +If you do something stupid - and it happens - start over. Save often. If you are unsure if what you are trying will work, save to another slot and try. Fall back to the old slot if it fails and try something else.
 +
 +//HINT: In PE, immediately press "c" to disable camera collision. You'll need to move the camera through body parts anyway.//
 +
 +Start posing the girl. You should start with the hip. Use shift-click. It doesn't matter if legs or arms disappear in furniture or walls. We'll fix that later. For my pose, the Hip should be on the desk, rotated backwards.
 +
 +Plan ahead. You should have an idea from what angle the cock will penetrate. Position the vag (or anus), that is, rotate the hip accordingly.
 +You'll rotate a LOT with the camera. Make sure the position looks right from all view angles. It's okay for the model to "sink" in the desk a bit (in reality, skin is soft and would give way).
 +When the hip is positioned, get a good side-view and play with spine controls. I usually use the Arched slider to get a straighter back for lying poses.
 +
 +{{http://www.imagebam.com/image/5b4abc245090483}} 
 +
 +First action now is to get the legs out of the way. Carl needs to get to that delicate pussy. After that, Carl can be moved in position for the fucking. Remember to leave enough room for the legs so they will not "overstretch" once we create the penetration loop. I assumed you know the posing basics, so go ahead and move the legs out of the way and bring on the male partner.
 +For my pose, I left Dee Dee's right leg on the table, the lower leg can get a swinging animation later. The left leg is raised, Carl may support it with it's hand later on. I rotated Dee Dee's hip slightly and put Carl in a good position to penetrate. 
 +
 +Now, test if your male is able to fuck. What I mean is, move his hip in the direction of the pussy, and see if he can get all the way to it without overstretched legs or ramming his upper legs deep into the table. Undo if you have tried it. This will almost guarantee that your penetration loop will work later. It's REALLY awful to spend 2 hours to create a good starting pose, only to discover your penetration loop looks like a heap of bullshit.
 +
 +{{http://www.imagebam.com/image/2fe897245090909}} 
 +
 +If for some reason it doesn't look good, re-position your male and female until it works for you; and more important, until **YOU** like it. It's your pose, after all.
 +Finish the starting pose. Think about the body parts you want to connect. Of course, the male's penis will connect to the female's vag, that's a no-brainer. But maybe your female will grab your male's shoulder, your male will hold your females breast or leg, and so on.
 +Don't forget the face, the Eye LookAt position, hand (thumbs+fingers) posing!
 +This is the part that will take most of the time for a pose.
 +
 +{{http://www.imagebam.com/image/5bd365245092168}} //Face detail: Male is looking (Eye LookAt!) at Female's face, and he is excited//
 +
 +{{http://www.imagebam.com/image/413c01245092286}} //Hand detail: Both Male and Female are holding Female's hip. Fingers are carefully moved to barely touch the skin.//
 +
 +That's good enough for this walk-through. Let's get on. We have nice starting pose, time to switch from animation to interactive and prepare the scene.
 +
 +==== Moving to interactive ====
 +It is good idea to determine the length of normal and penetration loop now and copy your start pose to the end of normal loop as well as to start and end of penetration loop. If you plan to create orgasm and cool down animations as well, you can copy the starting keys to those loops as well. I'd recommend doing that later; it may be the case that the starting position has to be modified (because something does not work out the way you planned), so you'd need to copy all keys again anyway.
 +
 +For this pose, I'll stick to default loops, so I don't need to change them. So i just copy my start keys to the end of animation loop, as well as to start and end of penetration loop (Time line 4). As I'll start to test my sequence from now on, **I set good camera keys**. This will also speed things up, as the camera swooshes to the default position every time I test the pose, and then every time I leave testing mode.
 +
 +{{http://www.imagebam.com/image/0d1f8e245092416}} 
 +
 +To make sure the pose is working as I have intended, I start with connecting the naughty parts. Connecting should always be done on the starting key of the animation loop, followed by copying the keys to all loops currently used.
 +
 +So I connect Carl's penis to Dee Dee's vagina and copy the keys again. Now we should start creating a base penetration loop. Remember physics in school? If you use force on an object, it will refuse to move at first. If you apply enough force, it will move - slowly. This is called inertia. Try to simulate that in the penetration loop. If you thrust a penis into a vagina, it will back up, but slower than the thrust. Hell, watch some porn to get a feel for the way it should look. It's that easy (and fun). As the male is connected to the female, if you pose the female hip the penis will follow. But if you pose the penis, the female's hip will stay where it is. Create a key frame on the penetration loop where the male's penis has penetrated the vagina, and the vagina has moved back a bit.
 +
 +When male and female are perfectly aligned, you don't need to do more. If not, you may fiddle with female's hip rotation and male's hip or penis rotation - whatever looks better. 
 +Notice which keys you have changed - we'll copy those keys from the start frame to the next time frame. You can right-click any slider and select "copy value", and then in another frame "paste value".
 +
 +In my pose, I only used hip translation for male and female. I copy those two values from the starting pose to the next key frame. That done, I have 2 frames with only a subset of keys needed for the basic animation. I copy them to the other keyframes I planned, alternating.
 +
 +That's it for now. It is - sadly - not really illustrated, so I'll continue some other time.